Fisher Sonde SR51 Signal Transmitter Metal Detector Manual

Fisher Sonde SR51 Signal Transmitter Metal Detector Manual. View the Fisher Sonde SR51 Signal Transmitter Metal Detector manual. This is the operator manual for a Fisher Sonde SR51 Signal Transmitter. The Fisher SR51 operates at 512Hz. The Sondes SR 51 is asmall signal transmitters used to trace the path of nonmetallic pipes. They are also used to locate blockages in a lines. Fisher Sondes work by being inserted into a pipe or duct by means of a push rod. The location is found by means of a receiver. You are viewing the manual and parts listings for the Fisher Sonde SR51 Signal Transmitter Metal Detector.
Bounty Hunter Gold Digger Metal Detector Manual. View the Bounty Hunter Gold Digger Metal Detector manual. The Bounty Hunter Gold Digger weighs 2.6 lbs and is powered by two 9 volt batteries. It has 2 search modes, motion all metal and discrimination. This Bounty metal detector has automatic tuning and ground balance, a 18 headphone jack, and a treasure meter for determining strength of signal. This Gold digger metal detector detects coin sized objects up to 6 inches deep and larger objects up to 2 feet. It does have trash eliminator control to remove undesirable items from detection. You are viewing the manual and parts listings for the Bounty Hunter Gold Digger Metal Detector.
Bounty Hunter 1st Texas Pilot Metal Detector Manual. View the Bounty Hunter 1st Texas Pilot Metal Detector manual. The Bounty Hunter Pilot is an easy to tune and easy to use metal detector. It has an adjustable shaft, built in speaker, and this detector only weighs 2.6 lbs. The Bounty Hunter1st Texas Pilot metal detector has a DTech 725 search coil. Features on this Bounty detector include a large, easy to read LCD display screen, and pinpointing ability on your target You are viewing the manual and parts listings for the Bounty Hunter 1st Texas Pilot Metal Detector.